Products

Closed Body Jaw to Swage Tubular Turnbuckle for 1/8" WireJaw to swage- Check Nut Locking.Specifications: 1/8" Wire 1/4" Pin 3" adj.

Closed Body Jaw to Swage Tubular Turnbuckle for 3/16" WireJaw to swage- Check Nut Locking.Specifications: 3/16" Wire 1/4" Pin 3" adj.

Cooler Tie-Down KitC. Sherman Johnson has designed this ergonomic hook to hook turnbuckle to be used to tie down coolers, chairs, dinghies, casting platforms or any other items that need to be secured. The body of the turnbuckle has a cushioned grip which allows...

Cotter Pin KitKit Contents: (6) Cotter Pin 1/16" x 1/2" Type 316 Stainless Steel (6)Cotter Pin 3/32" x 3/4" Type 316 Stainless Steel (4) Cotter Pin 1/8" x 1" Type 316 Stainless Steel (10) Cotter pin 5/32" x 1-1/4 Type 316 Stainless Steel (10)...

Cotter, Ring & Clevis Pin Parts KitKit Contents: (30) Clevis Pin Dia. 3/16", Grip 9/32" (30) Clevis Pin Dia. 3/16", Grip 13/32" (10) Clevis Pin Dia. 3/16", Grip 17/32" (6) Clevis Pin Dia. 1/4", Grip 13/32" (30) Clevis Pin Dia. 1/4", Grip 1/2" (6)...

Deck Terminal with Splice Eye*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on the...

Deck Toggle Turnbuckle to Hand Crimp Terminal for 1/8" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 1/8" Wire 1/4"-28 3" adj.

Deck Toggle Turnbuckle to Hand Crimp Terminal for 3/16" WireThis "T" bolt style fitting is used on decks or bulkheads. T-316 stainlessSpecifications: 3/16" Wire 1/4"-28 3" adj.

Diamond Pad EyeThis pad eye can be used on deck for life lines or other applications and has a safe working load of 750 pounds.Specifications: 1/4 in. Bail Length: 2-5/8 in. Width: 1-1/2 in.

Double Threaded Interlocking Gate Eye for 1/8" WireA single eye is used on one end of the gate area and threaded into eye nut.

Double Threaded Interlocking Gate Eye for 3/16" WireA single eye is used on one end of the gate area and threaded into eye nut.

Eye to Deck Toggle FittingThis fitting can be mounted to any flat surface and accept life line fittings, line, etc. Toggling action is 140 degrees. 

Eye to Eye Adjustable FittingThis fitting can be used wherever an eye is required on each side of the stanchion. Adjustable between 3/4" and 1". 

Eye to Jaw FittingThis fitting will convert a small bail at the stern rail to the standard gate eye to accept the over center gate hook.

Gate Eye to Splice Eye Fitting*Dyneema Line not included with fittingsC. Sherman Johnson Marine's Splice Line fittings allow you to easily splice hi tech Dyneema line to standard life line fittings. The Splice Line fittings are designed to be light weight and easy on...

Grab 'N Go Hook Mount Only with Clamp OnlyReplacement Mount Only

Hinged Pad Eye- 1/4"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle...

Hinged Pad Eye- 3/8"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle...

Hinged Pad Eye- 5/16"C. Sherman Johnson Pad Eyes fold flat when not in use. The eye gives with the load unlike rigid pad eyes; material reducing the load on the fastenings. A friction drag insures that the eye stays in position and is rattle...

Interlocking Swivel Gate Eye for 1/8" WireAn interlocking gate eye is used at the opposite end of the gate hook as a "hinge" for the gate.