Boating Performance
-
Bennett BAW2020 Actuator Wire Harness Extension - 20' 6BT-50011-80-00Vendor: BennettBennett's BAW2020 Actuator Wire Harness Extension is designed for BOLT electric trim tab systems. Refer to manufacturer recommendations and installation guidelines to ensure a proper fit. Designed for marine use.
- Regular price
- $43.81
- Regular price
-
$55.43 - Sale price
- $43.81
- Unit price
- per
-
Bob's Machine 100-114001 Action Series Jac Plate - 14", 300 HP MaxVendor: Bob's MachineBob's Action Series Jac Plates feature a one-piece design, meaning there are no C-channels to bolt on to increase setback. The pump is internally mounted for easy rigging, though may be converted to have the pump inside the boat if the owner desires to...
- Regular price
- $1,992.34
- Regular price
-
$1,843.20 - Sale price
- $1,992.34
- Unit price
- per
-
Bob's Machine 100-112112 Action Series Jac Plate - 12", 300 HP MaxVendor: Bob's MachineBob's Action Series Jac Plates feature a one-piece design, meaning there are no C-channels to bolt on to increase setback. The pump is internally mounted for easy rigging, though may be converted to have the pump inside the boat if the owner desires to...
- Regular price
- $1,620.00
- Regular price
-
$1,745.13 - Sale price
- $1,620.00
- Unit price
- per
-
Bennett Marine 6BT-50110-89-00 Standard (Classic) Hydraulic Trim Tab System with One Box Indication Unit - 12" x 12"Vendor: Bennett MarineBalance loads, plane faster, increase efficiency and performance. Hydraulic trim tabs are known for power, precision, and durability. Bennett Marine's Trim Tabs reduce pounding and eliminate porpoising. They are low-maintenance, long-term value, and ease of service. Exclusive transom mount interlocking tab design.
- Regular price
- $1,012.74
- Regular price
-
$1,174.29 - Sale price
- $1,012.74
- Unit price
- per
-
Bennett Marine OBI9000-E Bolt Control with Indication 6BT-50103-40-00Vendor: Bennett MarineBennett Marine Obi9000-E Bolt Control With Indication is made with quality materials. Refer to manufacturer recommendations and guidelines for proper installation/setup information. Installation is quick and easy.
- Regular price
- $368.05
- Regular price
-
$465.71 - Sale price
- $368.05
- Unit price
- per
-
Lenco Marine 15126-101 Electro-Polished Limited Space Trim Tab Kit - Standard, 4" x 12"Vendor: Lenco MarineEngineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. Boat lengths 14 (4.3 m) to 25 (7.6 m). Blades are constructed of...
- Regular price
- $597.64
- Regular price
-
$635.59 - Sale price
- $597.64
- Unit price
- per
-
Bennett 189 Hydraulic Trim Tab Set without Controls - 18" x 9" 6BT-50001-82-00Vendor: BennettBalance loads, plane faster, increase efficiency and performance. Hydraulic trim tabs are known for power, precision, and durability and Bennett standard hydraulic (classic) trim tab systems are available with multiple control options and in a vast variety of sizes. Get on plane fast, and...
- Regular price
- $642.91
- Regular price
-
$813.52 - Sale price
- $642.91
- Unit price
- per
-
Bob's Machine 100-604003 Extreme Gen 3 Versa Jac with 4" SetbackVendor: Bob's MachineBob Machine Shop has re-engineered their world famous Versa jack for 550+hp 1000LBS engines including V8. Bob Machine Shop Extreme Versa Jac jack plate line, offers technology in the Jack Plate market. The first and only jack plate to offer an upgrade kit for...
- Regular price
- $975.02
- Regular price
-
$1,069.68 - Sale price
- $975.02
- Unit price
- per
-
Bob's Machine 100-610005 Gen 3 Extreme Action Jac Plate - 10" Setback, 550 HPVendor: Bob's MachineBob Machine Shop has re engineered their world famous jack plate for new 550+hp engines, including V8s. The New Gen 3 Extreme Action is wider allowing for Verado installation without the use of spacers. The Extreme Gen 3 Action has the all in one...
- Regular price
- $1,698.64
- Regular price
-
$1,950.71 - Sale price
- $1,698.64
- Unit price
- per
-
Nauticus SX10512-70 SMART TABS SX Trim Tabs for 21'-25' Boats - Black, #70Vendor: NauticusThis larger version of our most popular SX Series SMART TABS has 32% more plaining surface to maximize the improvements in handling, ride and efficiency for the 21' to 25' power boats. The new hinge design incorporates 4 mounting bosses to insure durability on...
- Regular price
- $155.37
- Regular price
-
$198.25 - Sale price
- $155.37
- Unit price
- per
-
T-H Marine 65002 CMC Power Lift Hydraulic Jack Plate w/o Gauge - 5-1/2"Vendor: T-H MarineThe dependable, self-contained and water proof hydraulic actuator has a maximum lifting capacity of 7853 pounds of thrust. More than any other transom jack. You will have no problem lifting even a V-6 300 HP motor at full throttle. The PL-65 is rated for...
- Regular price
- $1,226.94
- Regular price
-
$1,298.01 - Sale price
- $1,226.94
- Unit price
- per
-
T-H Marine 52100 CMC PT-35 Tilt and Trim for up to 35 HPVendor: T-H MarineElectric hydraulic tilt and trim gives you power tilt and trim, better boat handling, more speed, lower fuel consumption and no more back strain. Rated for 35 HP and smaller engines. Electric Hydraulic Actuator Rated at 7853 lbs. of Thrust!
- Regular price
- $818.80
- Regular price
-
$925.44 - Sale price
- $818.80
- Unit price
- per
-
Nauticus SX9510-60 Smart Tabs SX Trim Tabs for 15'-17'+ Boats with 60-135 HP 4-StrokeVendor: NauticusThe SX series incorporates all of the fully automatic features of our popular Smart Tabs, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only tools...
- Regular price
- $150.24
- Regular price
-
$178.84 - Sale price
- $150.24
- Unit price
- per
-
Nauticus SX9510-40 SMART TABS SX9510 Series Trim Tabs - Black, #40Vendor: NauticusThe NEW SX series incorporates all of the fully automatic features of our popular SMART TABS, in addition to the rust and corrosion free benefits of molded composite materials. Assembly can be completed in seconds and the installation in a few minutes. The only...
- Regular price
- $150.24
- Regular price
-
$178.84 - Sale price
- $150.24
- Unit price
- per
-
Nauticus SX10512-90 SMART TABS SX Trim Tabs for 21'-25' Boats - Black, #90Vendor: NauticusThis larger version of our most popular SX Series SMART TABS has 32% more plaining surface to maximize the improvements in handling, ride and efficiency for the 21' to 25' power boats. The new hinge design incorporates 4 mounting bosses to insure durability on...
- Regular price
- $158.74
- Regular price
-
$198.25 - Sale price
- $158.74
- Unit price
- per
-
Lenco Marine 15088-101 Electro-Polished Limited Space Trim Tab Kit - XDS, 4" x 12"Vendor: Lenco MarineEngineered to fit behind ladders. This unique design gives you all the benefits of a standard tab in an ultra compact design. These kits are updated with 11-gauge stainless steel blades. Boat lengths 14‚ (4.3 m) to 25‚ (7.6 m). Blades are constructed of...
- Regular price
- $662.42
- Regular price
-
$870.02 - Sale price
- $662.42
- Unit price
- per
-
Lenco Marine 15064-001 Aftermarket Bennett Retrofit Conversion Kit - 12 VoltVendor: Lenco MarineBennett Hydraulic-to-Lenco Electric Conversion and Performance Upgrade Kits are designed as a direct replacement for the Bennett hydraulic power unit (HPU) on systems using Bennett 4-ring standard trim tab actuators. The kit includes everything necessary to upgrade your current boat without drilling or filling....
- Regular price
- $377.95
- Regular price
-
$496.39 - Sale price
- $377.95
- Unit price
- per
-
Lenco Marine 15054-001 101 Standard Actuator with 2.25" Stroke, 12 VoltVendor: Lenco MarineThe 101 Actuator is used in all Standard, Edge Mount and Standard Performance kits. They feature a 2.25" stroke, an overall length of 12.5", 12-Volt actuator with 0.3125" mounting hardware and a 6' cable. Lenco ball screw design is more reliable and twice as...
- Regular price
- $236.08
- Regular price
-
$310.08 - Sale price
- $236.08
- Unit price
- per
-
Lenco Marine 15037-101 Performance Electro Polished Trim Tab Kit Without Switch - 12" x 12"Vendor: Lenco MarineOur first series designed specifically for performance. This system comes equipped with a thicker reinforced hinge and complimented with an Electro-Polished finish for added quality and protection. Boat lengths 13, (4 m) to 40, (12.2 m). Blades are constructed of Electro-Polished 12 gauge (2.7...
- Regular price
- $780.88
- Regular price
-
$830.48 - Sale price
- $780.88
- Unit price
- per
-
Lenco Marine 15007-101 Electric Standard Mount Trim Tab Kit Without Switch - 12" x 12"Vendor: Lenco MarineThe series that started the electric revolution! Our original Trim Tab design and still the most popular series we build. Ideal for most common style boats from center console fishing boats to cuddy cabin cruisers. Boat lengths 14, (4.3 m) to 69, (21 m)....
- Regular price
- $598.13
- Regular price
-
$690.19 - Sale price
- $598.13
- Unit price
- per
