Boating & Watersports

Innovative Lighting's Hylite LED Identification Light Bar features red casing with a red lens. This 2 wire light bar operates 9 to 16V DC systems and features a 3-LED configuration. Required for trailers, campers and trucks over 80" in overall width. Rated at 100,000...

Twist/bayonet lock design secures lens and cover to base. Includes a 9-Watt (#906) wedge base lamp and 7" wire leads for connection to 12 VDC power supply. Installs directly to deck with two #10 fasteners. Cover and lens conceal installation fasteners and seal water...

Innovative Lighting's LED Rectangular Tail Light - Right Hand fits applications over 80". This 6-function, 9-LED tail light operates 9 to 16V DC systems. Features 100,000 hours of service life and a sealed polycarbonate lens and housing. The tail light is shock and vibration...

Designed with Anti-glare technology. For pole lights and new style applications. Used for series 5300, 5310, 5320, 5330 and/or 5340. Quick and easy to replace.

Since all-round lights must be at least "One Meter" above the sidelights, some boats require a longer pole light that is difficult to store.Attwood's Folding-Pole All-Round light solves this problem. It has all the features of the patented Articulating Anti-Glare light. It focuses light...

One-mile sidelight for powerboats under 39.4 feet (12 meters). Meets ABYC Standard A-16. 12-volt D.C., 6 CP (#90) lamp included. NMMA "As Approved List". No. 091145. 1-NM USCG. Dimensions: 2-9/16" L x 2-1/4" W x 1" H. Installation hole size: 3/4".

Innovative Lighting's SETS Piezo Electronic Hull Mount Horn is designed for use with 12 or 24V DC systems. For use with vessels under 12 meters (39.4 feet). This drop-in hidden horn uses "SETS" horn technology and draws less than 1/2 an amp. The unit...

A simple-to-install battery holder that fits into a limited space. For batteries up to 10" in height. Provides simple installation for changing or replacing batteries. The polypropylene hold-down strap has a positive locking, quick disconnect buckle. Molded base mounts with four #10 panhead screws.

Attwood Heavy-Duty Battery Trays are made of heavy-duty non-corrosive black plastic and includes adjustable height crossbar with stainless steel retaining bolts. Meet ABYC Standard E-10 and U.S. Coast Guard requirements. Interior Dimensions: 13-1/16" L x 6-7/8" W.

Clips are designed to clamp tight or spin around the pole. Bottom clip and O-ring can be moved to accommodate any size flag. Marine grade anodized aluminum with nylon flag clips.

The most important criteria when selecting a compass are dial size and mounting style. Quality components aid accuracy, smooth response, stability and trouble-free operation. RITCHIE NAVIGATION's Sport Compass X-10-A is for automotive use and is Gray with a blue dial. This compass is easy...

The most important criteria when selecting a compass are dial size and mounting style. Quality components aid accuracy, smooth response, stability and trouble-free operation. RITCHIE NAVIGATION's Voyager Compass F-82 is for marine use and is black with a black Direct-Read dial. This compass is...

Whitecap's 60114 Teak Handrail includes a solid teak grab handle, 1-3/8" wide x 9-3/4" long x2-1/4" high. It features pre drilled 3/16" mounting holes (fasteners not included). Mounts almost anywhere.

Fills recess gap on side of BMS jack plate; for jack plate mounting. (For BMS models manfactured before 2009.)

Michigan Wheel's XHS Xchangeable Hub Propeller Series offers high performance and versatility. The exchangeable hub kit has a Delrin cushioned sleeve that absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit....

Michigan Wheel's XHS Xchangeable Hub Propeller Series offers high performance and versatility. The exchangeable hub kit has a Delrin cushioned sleeve that absorbs impact and stress caused by shifting gears and is designed to spin under significant impact to protect your lower end unit....

Replace the handle on your Big Ball Ram Mount with a QuickSlip cam lever. Easier to make adjustments, and holds your graphs tighter so it doesnt fall down on you as you are running! Installs in less than a minute!

StingRay's HyperFoil 500 was created exclusively for the professional bass boater. The StingRay Hyperfoil 500 is manufactured with HyperSpeed Red material designed to reduce drag in the water. Vertical lift and unrestrained top-end speed are highly essential in the world of tournament fishing and...

The 101 XD Actuator is used mostly with HD, XD, High Performance & Super Strong tabs. 21/4" stroke Overall length tip to tip = 113/8 inches. Lenco ball screw design is more reliable and twice as powerful compared to typical hydraulics. Lenco's tough, high-torque...

Complete your Lenco single actuator trim tab system with the latest, maintenance-free, Standard (ALL-IN-ONE) integrated tactile switch kit design. This NEW switch technology improves accuracy and integrates the control box functionality into the key pad bezel. Standard Integrated Switch features: Simple, quick, Plug &...