Boats, Motors & engine Parts

Dual Water Feed Universal Motor Flusher with Rectangular Cup. For all engines over 50 horsepower Improved water flow with rectangular cups will virtually eliminate water leakage for higher pressure flushing. For use on all lower units with side water inlets; includes Volvos.

The Sierra 18-7846 21 Micron Replacement Fuel Filter is interchangeable with the following: Crusader 98041, GLM 24930, Evinrude/Johnson 502905, Mallory 9-37803. Each Sierra product meets or exceeds the original equipment part it replaces. Features Rating: 21 Micron and Thread Pitch: 1 in.-12.

Whitecap's 6061C Replacement Deck Fill Cap is constructed of 316 stainless steel. Check manufacturer recommendations to ensure a proper fit for replacement. Replacement Cap and Chain for 6123, 6124, 6125 & 6126 fits all 316 S.S. 1-1/2" Deck Fills. Quick and easy installation.

This hold-down kit is manufactured from poly strapping to provide superior strength and good looks. The quick release buckle makes it simple to remove and replace container. The hold-down strap unit comes complete with two 62" poly straps equipped with quick release buckles and...

Attwood fuel tanks are tested to meet EPA CAR and ABYC NNMA requirements for portable marine fuel tanks. The tanks have industry leading fuel flow performance and are designed and manufactured for safety durability in harsh marine conditions. Automatic vacuum valve in cap eliminates...

The ARCO 6263 Tilt Trim Motor fits Yamaha 200, 225, 250 HP 4-Stroke (2002-2009), 200-300 HP 2-Stroke (2009-2009). 2-wire connection, 3-bolt mount. Includes O-ring and ring terminal ends. It replaces the following part numbers: Mercury 888645T1, Yamaha 60V-43880-00, Yamaha 69J-43880-00, Yamaha 69J-43880-01, and Sierra...

The ARCO 5387 Outboard Starter fits BRP-OMC, V6, V8 loop, 115-300 HP E-TEC, 10-tooth drive gear. It replaces the following part numbers: BRP-OMC 391511, BRP-OMC 396235, BRP-OMC 397023, BRP-OMC 584799, BRP-OMC 586289, BRP-OMC 586411, BRP-OMC 586731, BRP-OMC 586890, BRP-OMC 586897, BRP-OMC 586957, and Sierra...

The ARCO 5373 Outboard Starter fits BRP-OMC, 150-235 HP V6, 8-tooth drive gear. It replaces the following part numbers: BRP-OMC 387094, BRP-OMC 395207, BRP-OMC 585062, BRP-OMC 586288, BRP-OMC 778992, Sierra 18-5600, and Sierra 18-5640. Epoxy powder coated for maximum corrosion protection. Motor shafts induction...

The ARCO 5393 Outboard Starter fits Chrysler/Force, 70-150 HP, 9-tooth drive gear. It replaces the following part numbers: CHRYSLER 480955, CHRYSLER 490955, CHRYSLER F616955, CHRYSLER FK616955, Mercury 50-819085, Mercury 50-819085-1, Mercury 50-819085T1, Mercury 50-853869, Mercury 50-853869T, Mercury 50-898265002, FORCE 50-819085, FORCE 50-F616955-1, FORCE F616955,...

Sierra's 18-7713 Inline Fuel Filter is designed for use in Mercury 9.9 HP and 15 HP (4-Stroke) outboard engines. The filter is located under cowl on outboard engines. Features a Micron rating of 80. It is interchangeable with Mallory 9-37969, Mercury Marine 35-80365M, and...

Sierra's 18-3668D Thermostat Kit features a 142 °F Temperature Rating. It is designed for use with 1983 and newer GM V-6 and V-8 engines with standard cooling. It is interchangeable with GLM 13390, Mallory 9-43150, Mercruiser Stern Drive 807252Q4, 807252T4. The kit contains 18-2552...

The ARCO SW109 Solenoid is designed for use in Mercury and Force applications. It replaces the following part numbers: Mercury 89-817109A1, Mercury 89-817109A2, Mercury 89-817109A3, and Sierra 18-5834. Designed to withstand the harsh marine environment.

Fits 25 Hp - 90 Hp 4-Stroke Carbureted Outboards 1999 & Newer. Barb Size: 5/16 inches. Micron Rating: 30. Constructed with precision for optimal performance and reliability.

The ARCO 5375 Outboard Starter fits Mercury/Mariner, 50-90 HP/65 HP Jet, 10-tooth drive gear. It replaces the following part numbers: Mercury 50-44369A1, Mercury 50-60315, Mercury 50-65436, Mercury 50-66015, Mercury 50-66015-2, Mercury 50-66015-T, Mercury 50-893891T, Sierra 18-5604, and Sierra 18-5642. Epoxy powder coated for maximum...

Sierra's Synthetic Gear Lube is specifically formulated to optimize gear life by reducing friction. It provides superior wear protection in severe operating conditions. This unique synthetic formulation is shear stable. Resists oxidation to ensure high performance over a wide range of ambient operating temperatures....

Sierra's TC-W3 Premium Blend Marine Oil is a high performance lubricant designed and manufactured to meet and exceed all engine manufacturers warranties. It exceeds JASO, ISO, API, and NMMA for advanced generation 2-cycle lubricants. Ideal for oil injection systems or pre-mix applications. Significantly reduced...

Turning Point Propellers LE-1419 Hustler 3-Blade Aluminum Propeller for 40-300+hp Engines with 4.75" Gearcase is a right hand propeller and has a 14.25" diameter and a 19" pitch. Turning Point has built their reputation on a relentless focus on engineering the best performing aluminum...

All tanks are molded from UV stabilized. Features high density polyethylene for excellent durability and long product life. New tooling and better quality finish result in superior products that customers demand.

Each Solas boat propeller is balanced and precision made with superior materials for a higher strength and thinner blade that is smooth, fast, efficient and tough. Solas aluminum propellers are squeeze-cast and coated with four paint layers. The Amita 3 propeller offers a stronger...

Speedometer kit from Sierra is composed of quality marine-grade materials for optimal performance and reliability. Features enhanced illuminations due to the thru-dial and perimeter lighting functionalities making readability at night easy. Designed with U.S and metric scale units.