Marine Electronics & Navigation

Transducer Adapter Cable - 12-PinKeep your black box sonar on the water with this replacement right angle transducer adapter cable, which has 12-pins and is 0.6M (23.6") long.WARNING: This product can expose you to chemicals which are known to the State of California to...

Axiom RV Adapter Cable (25-pin to 7-pin)Adaptor Cable (25 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom RV

Axiom 7DV Adaptor Cable (9-pin to 7-pin) For attaching a CP370Adaptor Cable (9 pin to 7 pin) to attach an existing 7 pin Airmar (direct connect to ax7/eSx7 MFD) transducer to Axiom 7DV

RealVision 3D Transducer Extension Cable - 8M(26')RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at...

RealVision 3D Transducer Extension Cable - 5M(16')RealVision 3D Transducer Extension Cables work with both the transom mounted RV-100, as well as through-hull RV-200 and RV-300 series transducers.  Each extension cable features a waterproof, twist-lock connector at the MFD end, and a compatible socket at...

Trolling Motor Mount - 4/8-PinEasily attach your compatible 4- or 8-pin scanning transducer to the trolling motor of your boat with this mount. Its low-profile design provides ultimate protection from underwater obstructions and easy mounting.WARNING: This product can expose you to chemicals which are...

Replacement Fairing Block f/GT21, GT23, GT41, GT50 & GT51 Series of Thru-Hull Scanning TransducersUse our fairing block to position your Garmin GT21, GT23, GT41, GT50 or GT51 series of thru-hull scanning transducers parallel to the water line for increased sonar accuracy. If the deadrise...

6W Floating Handheld Marine VHF TransceiverCompact Case DesignCompact, ergonomic case design is a result of the new internal, large capacity 1850 mAh Lithium Ion battery technology. This gives the radio a much smaller case design yet light enough to float face up if dropped...

Adapter Cable for CPT-70 and CPT-80 TransducersThis Raymarine adapter cable is required when hooking up a CPT-70 and CPT-80 transducer to a Dragonfly unit with a green locking collar.

WindSense - Wi-Fi Wireless Wind SystemWindSense is a wireless wind system designed to allow iPads, tablets, SmartPhones and PCs to display accurate apparent wind speed and direction. It features a high quality, precision mast head sensor with 20m cable that connects to a below...

A80328 Adapter CableProduct Compatibility: Single B75/B175 Operation Cable

GNX™ Wireless Sail Pack 43The Sail Pack You Need with 43 mm Transducers Includes Garmin GNX™ Wind and GNX 20 marine instruments, gWind™ Wireless 2 transducer, plus GDT 43 and GST 43 with 43 mm fittings and adapters for NMEA 2000® network sharing GNX...

Transducer Extension Cable for CP470/CP570 Wide CHIRP Transducers - 10MFeatures: Speed, Depth and Temperature 10M Specifically for Raymarine's CP470 and CP570 Wide CHIRP Transducers

Transducer Adapter Cable f/P72, P79, GT15 & GT30 for echoMAP CHIRPConnect a Garmin GT30 transom mount scanning transducer and a Garmin GT15M-IH, Airmar P72 or Airmar P79 in-hull mount traditional transducer to a compatible echoMAP CHIRP chartplotter/sonar combo.This adapter cable allows the echoMAP CHIRP...

i70s Multifunction Instrument DisplayMaximum Visibility and Maximum VersatilityThe i70s multifunction gives you the flexibility to display instrument and navigation data that is most important to you. Equipped with a bold and bright 4.1_ display, the i70s is easy-to-customize with digital, analogue and graphical displays...

Transom Mount Mounting Bracket for CPT-60Raymarine's mounting bracket specifically for CPT-60.

GPS 73 - InternationalEasy-to-use GPS Handheld Navigator High-sensitivity GPS marks and stores 1,000 waypoints and 100 tracks Marks your favorite locations to easily navigate back to them Garmin SailAssist for GPS 73 includes virtual starting line, heading line, countdown timers and tack assist Sunrise/sunset,...

AX8™ Ball & Socket MountOptional FLIR Ball and Socket Mount for FLIR's AX8™ and Pathfinder ii

Free Standing MountFLIR Free Standing Mount for FLIR's AX8™ and Raymarine Dragonfly 4/5/7.

FishTrax™ Adjustable Mounting Bracket with Suction CupUtilizing the TraxMount FishTrax™ adjustable mounting bracket with suction cup you can easily mount your FishTrax™ fish finder to any flat surface on your kayak, small boat or canoe. Combine it with a TraxMount Weighted Display Mount Pad or...