Marine Electronics & Navigation

Raymarine CPT-80 Bronze Thru Hull Transducer with High Speed Fairing Block Model: A80349 UPC: 723193799222 Specifications Installation Type Through-hull Material Bronze Maximum Depth DV=600, FF=900 Beam Width 25°/60° Cable Length 33ft/10m Deadrise 0-25° What's in the Box: CPT80 Transducer with 33' cable Fairing block...

Raymarine Adaptor Cable Adapts CPT-60DVS to Dragonfly 6 and 7 Model: A80331 UPC: 723193796115 Use this adapter cable to connect a Dragonfly 6 or 7 to a CPT-DVS transducer.

Raymarine 10m Extension Cable for HandsetModel: A80292Use this 10m cable to extend the handset that is included with the Ray60, Ray70, Ray90 and Ray91 radios.

Raymarine 5m Extension Cable for HandsetModel: A80291Use this 5m cable to extend the handset that is included with the Ray60, Ray70, Ray90 and Ray91 radios.

Raymarine 15m Extension Cable for HandsetModel: A80290Use this 15m cable to extend the handset that is included with the Ray60, Ray70, Ray90 and Ray91 radios.

CPT-200: CHIRP SideVision™ Transducer Engineered for high performance CHIRP sonar, the CPT-200 transducer is perfectly matched to the CP200?s CHIRP transceiver. CPT-200 Key Features Transom mount CHIRP SideVision™ sonar array for the CP200 Independently adjustable port and starboard arrays for shallow, mid or deep-water...

25 Meter - SeaTalkhs Radar Cable for connecting Digital and HD Digital Radar Antennas to your multifunction display

15 Meter - SeaTalkhs Radar Cable for connecting Digital and HD Digital Radar Antennas to your multifunction display

Compatible with the following instruments: ST70 ST60+ ST290   Compatible hull material: wood and fiberglass Frequency: 200 kHz Cable: 45ft cable Hole diameter for installation: 2" Other: Self-sealing removable paddle wheel insert. Long stem for extra thick and cored hulls. Note: E66023 Fairing block...

Compatible with the following instruments: ST70 (direct connect to ST70 backbone, no pod required) Compatible hull material: aluminum and fiberglass Hole diameter for installation: 2" Operates at 235kHz so there is no interference with your 50/200 kHz fishfinder transducer. Airmar's Smart™ Sensors have embedded...

Invented by Autohelm in 1973, tiller pilots have consistently been the world's most popular pilot ever since, setting the standard for performance, reliability and ease of use. Advanced features are standard. AutoTack lets you handle the sheets, while the pilot tacks the boat and...

Poly-Planar MB41 10W VHF Extension Speakers Surface Mount - WhiteModel: MB41-W Completely waterproof and corrosion-proof Features stainless steel grills, sturdy plastic frames, polypropylene speaker cones and teflon-coated wires Ideal for use as a VHF remote A stand-alone 4" VHF extension speaker that’s completely waterproof,...

The Phone-Com intercom system provides direct, wired, point-to-point communication anywhere on the vessel. Voice contact to any phone in the system is as easy as lifting the receiver and pressing the call button. Phone-Com operates on 12 VDC. They are constructed of high-impact plastic...

Hailer Horns Clear, distortion free, waterproof deck horns are ideal for shipboard paging, hailing, fog horn and alarm systems. High impact plastic construction and assembled with stainless steel hardware. 8 Ohm.   Model Output Nominal / Peak PA-8W 8 watts / 12 watts PA-30/20...

NAVPOD SK125 PowerPanel Stanchion KitModel: SK125PowerPanel Stanchion Kit -Two 1.25" S.S. tubes for overhead mounting of GP1300, GP1400, GP1500 or GP1600 SeriesThe SK125 Small PowerPanel Stanchion Kit is used for overhead mounting of the GP1300, GP1400 Series InstrumentPods and the GP1500, GP1600 Series SystemPods.PowerPanel...

NavPod SK100 Stantion Kit SK100 Stanchion Kitis used for mounting all 9.5" InstrumentPods or GP160 Series SystemPods onto a flat surface.   H W Overall Size 15" 9.5" Stanchion Kit includes 1" diameter 316 stainless steel Mirror polished finish Pre-drilled mounting and wire access...

NavPod RMX4813 RailMount Pre-Cut for Simrad NSS9 evo2 or B&G Zeus2 9" RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless...

NavPod RMX4809 RailMount NavPod Pre-Cut for Raymarine c95 / c97 / e95 / e97 RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A...

NavPod RMX4804 RailMount NavPod Pre-Cut for Garmin 5008 / 5208 RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel arm...

NavPod RMX4401 RailMount Pre-Cut for Garmin 720/721/740/740s/741/721xs/741xs/70s/70dv (1" or 1.25" tubing) RailMount NavPods are best used for mounting of an autopilot control, sailing instrument, or small chartplotter onto an existing pedestal guard. Fits onto any 1" or 1.25" diameter tube. A Chromed Stainless Steel...