Marine Electronics & Navigation

This transducer adapter allows you to use your existing 6-pin dual-beam transducer with your 4-pin echo™ series fishfinder.

Linear drive unit for GHP-12 corepack. For sailboats with up to 79,000 lbs of displacement The Class B Drive Unit works with the GHP 12 Marine Autopilot System to control your sailboat's steering system. This device is designed for use with larger sailboats with...

Garmin CCU/ECU Interconnect CableModel: 010-11055-00Use this cable to extend your bare wires and your ECU (electronic control unit) to CCU (course computer unit) interconnect cable so you can install your GHP™ 10.

Garmin Reactor 40 Course Computer UnitModel: 010-11052-67Garmins CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to the NMEA 2000 network to communicate with your GHC 20 and an...

Garmin Reactor 40 Steer-by-wire Course Computer UnitModel: 010-11052-65Garmins CCU is the brain of the Reactor 40 autopilot system, containing sensory equipment used to determine heading and rate of turn. Connect the CCU to your boat's steering system and the NMEA 2000 network to communicate...

 Want to know the temperature of the water at the surface? Attach this probe to your transducer and it'll tell you.

Garmin Ultra High-Definition Scanning Sonar System GCV™ 20 Scanning Sonar Black Box Without TransducerModel: 010-02055-10 Ultra High-Definition scanning sonar system provides crisp images of structure and fish in stunning detail Ultra High-Definition ClearVü sonar provides brilliant image clarity of structure and fish up to...

Garmin 010-01333-04 6' Antenna For XHD2 PedestalsModel: 010-01333-04 Xhd2 radar Array For replacement purposes To be used with Xhd2 pedestals Garmin designs, manufactures and markets GPS, communication and sonar products. They are committed to the development and support of exceptional products that assist people...

Garmin 010-01333-03 4' Antenna For XHD2 PedestalsModel: 010-01333-03 4 ft Open Array Radar Antenna 1.8 Degree Beam Target Positioning & Separation Meets IPX7 Waterproof Standard The Garmin 010-01333-03 is a 4-foot open array antenna with narrow 1.8° beamwidth. This high-performance antenna provides accurate picture...

Furuno 6kw Gearbox Pedestal for DRS6AX Model: RSB134-112

The Accusteer PUMPLA11-12 Linear Actuator is designed to interface an autopilot system with mechanical steering systems such as wire, cable or chain drives. This linear actuator consists of a hydraulic drive unit, steering cylinder, and interconnecting hoses.This unit is also available as the PUMPLA17-12...

The Accusteer PUMPLA17-12 Linear Actuator is designed to interface an autopilot system with mechanical steering systems such as wire, cable or chain drives. This linear actuator consists of a hydraulic drive unit, steering cylinder, and interconnecting hoses.This unit is also available as the PUMPLA11-12...

The PUMPHRP17-24 is a reversing pumpset designed to interface the NavPilot series autopilot with a hydraulic steering system. The pump assembly incorporates a reversible gerotor gear pump, a two -piece gear housed in an eccentric ring. This allows for incredibly quiet, reliable and precise...

Furuno MCU004 Black Box Control UnitModel: MCU001 "Active Display" switching allows (1) MCU004 to control up to (4) TZtouch2 MFDs Joystick plus full RotoKey controller Edge-swipe plus cursor control for full menu access Home & brilliance control Pan & Zoom capability Shortcut function button...

1 kW 50/200 kHz 28/8.5 degree Beam Angles Rubber Coated - Chest, Housing or Tank Mount 10-Meter Cable, no connector provided MB1100 required for some applications - contact your sales person.

Furuno AIR-044-103 Temperature NMEA ConverterModel: AIR044103The Furuno AIR-044-103 is an Analog-to-NMEA0183 Temperature Converter. It connects to a standalone temperature sensor or temperature sensor component of your transducer and converts the data into NMEA sentences for use with a number of devices. This converter works...

Adapter Cable, 10-Pin Transducer to 8-Pin Sounder

Plastic Transom Mount Clip, for use with ST-01PTB

1,000 Watts Power 50/200 kHz with Diplexer 20/6 degree Beam Angles Stainless Steel Thru-Hull with Temperature No Connector High Speed Fairing Block included

If a thru-hull flush-style 600W transducer is what you need, the Tilted Element 555T-LTD/12 will accommodate a deadrise angle between 8 and 15 , while the Tilted Element 555T-LTD/20 is right for hulls with a deadrise angle of between 16 and 24 . Both...