Marine Hardware

Nylon Flagpole Pennant Mounts & Stainless Clips - PairThe Sea-Dog® Adjustable Rail Mount Flagpole is constructed of highly polished, heavy wall stainless steel tubing with an injection molded nylon rail mount bracket. The flag is attached to the flagpole using nylon adjustable flagpole clips...

Solid Braid Polyester Cord Hank - 5/32" x 50' - WhiteUtility CordageFeatures: Solid braid polyester cord Mildew and rot resistant Excellent for many quick tie and flag halyard applications

Poly Rail Mount Motor Bracket - WhiteInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings....

Poly Rail Mount Motor Bracket - BlackInjection Molded PolypropyleneThese Rail Mount Motor Brackets are designed to hold small, 2-cycle outboards up to 8 HP upright on the stern rail. Will fit both 7/8" and 1" rails, as well as rails using 90° tee fittings....

Nylon Tube Connector - Black - 7/8"Tube Connectors are used for connecting the ends of stainless steel or aluminum tubing by sliding inside the tube. Fits 7/8” tubing. Constructed of injection molded nylon. *Stainless tube wall thickness 0.049”.

Replacement Seat Strap - 18"This is a replacement strap that is quick and easy to install. Simply attach where your old strap was and stick on the specially formulated 3M adhesive Velcro that adheres to vinyls. Strap is 18"

Chrome Plated Brass Window Anti-Rattle Window StopThis Anti-Rattle Window Stop reduces vibration and noise while underway. Threaded pin tightens on shank. Constructed of chrome plated sand cast brass. Installs with two #6 FH fasteners (not included).Features:  Sand Cast Brass Chrome Plated Fastener #6 FH...

Brass Snap Handle Drain Plug - 1-1/4" Snap-handle drain plugs feature cam action for easy installation and a leak proof seal. Simply turn the handle clockwise to tighten the plug then snap down the handle to lock. Durable stamped brass and nitrile rubber construction.

 Power Pole Cover f/Pro Series & Sportsman 8' Models OnlyPower Pole protective travel cover made of 1800 denier polyester PVC coated black fabric. The PVC coated inside assures that the cover will not scratch the finish while protecting the power pole from road debris...

Brass Baitwell Plug - 3/8" Cam action nitrile rubber plug snaps shut to form a leak-proof seal for livewells and baitwells. Clockwise turn of the handle tightens the plug, brass lever snaps down to lock. Snap lock handle is adjustable to tighten plug size to...

Emergency Tow Strap - 10,000lb CapacityThis emergency tow strap is a must have if your boat becomes inoperable. The fluorescent orange bag for storage can also be used to wave down help or as a backup if you're required to have an orange flag...

Stick-On OrganizerThe organizer is designed to store your most often used fishing tools in places you need them the most without drilling holes or using screws. It utilizes the 3M dual lock technology to provide a permanent adhesion indoor or out. This unique product...

Map SaverThe map saver features the 3M dual lock technology to provide a permanent adhesion indoor or out. It also comes with stainless steel mounting screws. The map saver keeps cell phone, wallet, money, keys, glasses, maps, etc. organized and dry in this water...

T5 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4...

Utility/Wardrobe HookFeatures: Chrome Plated Zinc Projection: 1-3/8" Base Width: 1-1/8"

T5 Through Tilt Tube Electro Steer - SaltwaterT5 provides a unique solution to steer a kicker motor. Can be installed on kicker motor with threaded tilt tube without drilling any holes in the boat. Installs in minutes and requires only 4 inches between the...

T4 Through Tilt Tube Electro Steer - Saltwater - No ElectronicsA unique product to steer a kicker motor. Can be installed on any kicker motor that has a treaded tilt tube. No need to drill holes in your transom. Installs in minutes. 9″ minimum...

Swim Platform Outboard Motor BracketBuilt extra-tough and extra-wide for auxiliary motors. The mounting board is 2” thick weatherproof and maintenance-free polypropylene. Adjustable for long or short shaft engines. Position trim adjustment available by moving bolts on bracket. Rated for outboards up to 20 HP.Features:...

101 Electro Steer - SaltwaterWith the freshwater model’s success, a great product is made better with the introduction of the Electro Steer Saltwater Model. The corrosion-resistant stainless steel frame and saltwater-proof gear rack offer the utmost in durability and dependability. A fast response provides...

Seal Kit for Reversing PumpReversing pump seal kit