Marine trailering
-
Stoltz 421-2089 Cross Member Pad - 4" x 12"Vendor: StoltzCross member pads are composed of marine-grade components for optimal performance and reliability. Comes in a length that measures 12 inches long. Designed to finish 4inch cross member. Cross member pad measures 4 inch x 12 inch.
- Regular price
- $23.28
- Regular price
-
$25.58 - Sale price
- $23.28
- Unit price
- per
-
TRIMAX THP2XL Shackle-Less Steel Padlock for All Trailer Hasps - 2-PackVendor: TrimaxTRIMAX's Shackle-Less Steel Padlocks fit all trailer hasps! They are designed for use on gates, trucks, and heavy-duty hasps. Lock it or lose it!
- Regular price
- $61.92
- Regular price
-
$61.92 - Sale price
- $61.92
- Unit price
- per
-
Rod Saver DKMS Deluxe Kicker Motor Tie-DownVendor: Rod SaverThis Rod Saver Deluxe Kicker Motor Tie-Down System features a vinyl coated mounting bracket that installs between your boat transom and the mounting bracket of your motor. Once installed just hook It up and use a rubber ratchet buckle to tighten it up. Refer...
- Regular price
- $24.13
- Regular price
-
$37.50 - Sale price
- $24.13
- Unit price
- per
-
T-H Marine BE-TR-59402-DP Trailer Coupler LockVendor: T-H MarineThe Trailer Coupler Lock is a simple and effective way to secure your trailer on or off the hitch. The screw in pin secures the coupler latch down in the locked position so it can't be removed from your trailer hitch or fit over...
- Regular price
- $12.93
- Regular price
-
$9.40 - Sale price
- $12.93
- Unit price
- per
-
Peterson E421R The 421 Series Red Oval Stop/Turn/Tail Light - Lamp OnlyVendor: Peterson ManufacturingSealed oval stop, turn and tail light may be used on both curbside and roadside of vehicle or trailer. Legal in either horizontal or vertical position for both U.S. and ECE applications. Polycarbonate lens is welded to housing to form a single unit. Requires...
- Regular price
- $12.76
- Regular price
-
$9.17 - Sale price
- $12.76
- Unit price
- per
-
Tie Down Engineering 86830 U-Bolt Square Pair Zinc Plated 3/8-16" x 3-1/8" x 4 x 1-3/4"Vendor: Tie Down EngineeringTie Down's Zinc Plated U-Bolts are used for mounting brackets to trailer frames. Includes flat washers and nyloc nuts. Sold as a pack of two.
- Regular price
- $22.30
- Regular price
-
$33.13 - Sale price
- $22.30
- Unit price
- per
-
Tie Down Engineering 86279 5" Keel Roller with Panel Bracket AssemblyVendor: Tie Down EngineeringBrackets are one-piece assemblies which include keel roller, shaft and cap nuts. Rollers available in amber or black poly-vinyl material and black rubber. 11 gauge steel is hot dip galvanized for extra protection, specifically designed to use with keel rollers.
- Regular price
- $34.11
- Regular price
-
$52.06 - Sale price
- $34.11
- Unit price
- per
-
Sea-Dog 331360-1 Midget Vent - 1-5/8" x 1-3/4" x 1/2"Vendor: Sea-DogCorrosion resistant stamped 304 stainless steel midget clam shell vents provide a splash-proof opening through transoms, cabin sides, etc. Great for routing cables and wires or for covering thru-hull openings to shield water spray. Ideal for small lockers, they provide attractive cover for ventilation...
- Regular price
- $4.20
- Regular price
-
$3.33 - Sale price
- $4.20
- Unit price
- per
-
Tie Down Engineering 81140 Precision Tapered Roller Bearing Kit - 1-3/8" x 1-1/16" (Cup 2.3612" OD), Red and YellowVendor: Tie Down EngineeringPrecision Tapered Roller Bearing Kits include two cones, two cups, seal, and cotter pin. Each bearing features a "Spot On" bearing reference color coded system for quick reference. Attractively packed for retail sales.
- Regular price
- $20.96
- Regular price
-
$29.83 - Sale price
- $20.96
- Unit price
- per
-
Tie Down Engineering 86117 Roller Bunks - 4', PairVendor: Tie Down EngineeringHeavy-duty galvanized steel frame provides full hull support. Roller bunks can be adjusted vertically with the optional bolster support swivel brackets. Bunk kits do not include mounting hardware. The 81210 8" Bolster Swivel Brackets are required for mounting and are not included with these...
- Regular price
- $175.84
- Regular price
-
$258.78 - Sale price
- $175.84
- Unit price
- per
-
Peterson V941 LED Under 80" Wide Trailer Rear Light KitVendor: Peterson ManufacturingPeterson's LED Submersible Trailer Rear Light Kit is designed for trailers under 80" wide. Kit includes one of each of Peterson's 840/840L LED Combination Tail Lights, 20' trailer harness, license bracket, mounting hardware and installation instructions. Front side marker lights and side reflectors are...
- Regular price
- $57.20
- Regular price
-
$96.85 - Sale price
- $57.20
- Unit price
- per
-
Tie Down Engineering 86260 Fender Mounting Brackets - Offset for 8" and 12" FendersVendor: Tie Down EngineeringGalvanized metal fender brackets accommodate 8" to 12" fenders. Designed for use with metal constructed fender models. They are available in flush-mount and offset-mount styles. These 86260 offset-mount brackets are sold in pairs.
- Regular price
- $26.64
- Regular price
-
$39.16 - Sale price
- $26.64
- Unit price
- per
-
Tie Down Engineering 86828 U-Bolt Kit 3/8"-16 X 2.12 X 4 Ztow Zone PairVendor: Tie Down EngineeringTie Down's Zinc Plated U-Bolts are used for mounting brackets to trailer frames. Includes flat washers and nyloc nuts. Sold as a pack of two.
- Regular price
- $13.75
- Regular price
-
$16.83 - Sale price
- $13.75
- Unit price
- per
-
Peterson Manufacturing V440-09 License BracketVendor: Peterson ManufacturingPeterson Manufacturing's tough molded bracket will never rust or corrode. Flexible, plastic material allows bracket and license plate to deflect on impact. Designed for use with most PM stud-mounted tail lights. Color - Black.
- Regular price
- $3.62
- Regular price
-
$2.20 - Sale price
- $3.62
- Unit price
- per
-
Peterson V170A The 170 Series Piranha LED Clearance/Side Marker Light with Reflex - AmberVendor: Peterson ManufacturingLED 2-diode light that functions as clearance or side marker light. Operates from 9-16 Volts and features a 2-wire, hard-wired design. Ground wire includes #10 ring terminal. LED alternative to traditional incandescent 114-Series light. Two mounting options: use center stud or 2 mounting screws.
- Regular price
- $12.30
- Regular price
-
$10.21 - Sale price
- $12.30
- Unit price
- per
-
Peterson Manufacturing V5411 4-Way Flat TesterVendor: Peterson ManufacturingTester plugs into connector of tow vehicle and illuminates when the electrical connections are correct. Tests to SAE standards on flat 4-way functions for tail light, stop/turn lights, and ground. Quick and easy use.
- Regular price
- $14.28
- Regular price
-
$4.71 - Sale price
- $14.28
- Unit price
- per
-
Tie Down Engineering 86119 Heavy-Duty PVC Post Guide-On's - 60", 13 Degree SlantVendor: Tie Down EngineeringPVC guide on posts feature bright orange end caps providing visual markers to help launch and load your boat safely. Posts are available in 48" and 60" lengths as well as a 90 degree straight angle or a 13 degree slant angle. The 13...
- Regular price
- $87.06
- Regular price
-
$140.78 - Sale price
- $87.06
- Unit price
- per
-
Peterson V153KA The 153 Series LED Clearance/Side Marker Light - Amber Kit, 2-DiodeVendor: Peterson ManufacturingLED 2-diode clearance/side marker light. Lens is welded to housing to form a single rugged unit. Kit includes 153 LED light, 150-095 mounting bracket and plug. DOT legal when mounted horizontally with up to 32 degree tilt back. Available with a red or amber...
- Regular price
- $16.65
- Regular price
-
$10.44 - Sale price
- $16.65
- Unit price
- per
-
TRIMAX TRP3170 Stainless Steel 70mm Round Padlock with 10mm Shackle - Pack of 3Vendor: TrimaxTRIMAX's TRP170 Stainless Steel 70mm Round Padlock with 10mm Shackle offers excellent protection against bolt cutters. Each lock offers an exclusive armor-plated key core for added security. Lifetime guarantee.
- Regular price
- $39.06
- Regular price
-
$39.06 - Sale price
- $39.06
- Unit price
- per
-
Pacific Rim MJ-1500BBX-DWL Swivel Tongue Jack - 1,500 lb, BoxedVendor: Pacific RimThese jacks are ideal for marine and utility trailer applications. All swivel jacks come standard with heavy duty 1/2" pull pin. Jacks are protected with 100hr salt spray clear zinc finish. Bolt-on models fit up to a 3"x 5" trailer frame. Specifications include 10"...
- Regular price
- $109.66
- Regular price
-
$159.92 - Sale price
- $109.66
- Unit price
- per
