{"product_id":"victron-ori121217040-orion-xs-smart-12-12-50a-700w-dc-dc-charger","title":"Victron ORI121217040 Orion XS Smart 12\/12 50A (700W) DC-DC Charger","description":"\u003cp\u003e\u003cstrong\u003eSmart Buck-Boost 50A (700W) DC-DC Charger - Non-Isolated\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost DC-DC Charger can be used as a battery charger or as a power supply with a wide input and output voltage range. In charger mode, the four-stage charge algorithm will increase battery life by properly charging the battery.\u003c\/p\u003e\u003cp\u003eEspecially in the case of vehicles with a Euro 5 or 6 smart alternator, which often supplies too low charging voltage even with the engine running or in the event of a voltage drop over long cables, controlled charging is crucial.\u003c\/p\u003e\u003cp\u003eControlled charging also protects the alternator in lithium systems from overloading, as the low impedance of lithium batteries results in a high alternator current.\u003c\/p\u003e\u003cp\u003eIn power supply mode, the output voltage remains stable regardless of the applied load or fluctuating input voltage (within the specified range). The output voltage is fully adjustable and remains independent of the input voltage, thanks to the automatic buck-boost control. This control also guarantees that the current will never exceed the set value, even when the input voltage is higher than the output voltage.\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost can be set to only supply power when the engine is running. This is possible thanks to the integrated engine shutdown detection. This eliminates the need to adjust in-vehicle wiring or add an engine detection sensor to determine if charging can start. It also prevents the voltage on board the vehicle from getting too low. In addition to this detection, the Smart BuckBoost can also be forced on via the remote on\/off port.\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost is fully programmed and monitored using the VictronConnect App. This also includes remote access via VictronConnect-Remote (VC-R) when connected to a GX device (requires a GX device connection to the VRM Portal) via the integrated VE.Direct port, monitoring via the GX Remote Console or from a PC, Apple computer with macOS, or Android device in conjunction with a VE.Direct to USB interface and VictronConnect. Discover all setting and monitoring options in the Setup \u0026amp; monitoring with VictronConnect [15] chapter and the VictronConnect manual.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIn the Box\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eSmart Buck-Boost 50A (700W) non-isolated DC-DC Charger 12\/12-50 with terminal block for remote on\/off connection  \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFeatures\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSmart Alternator Compatibility\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIt is common for vehicle manufacturers to install \"smart\" ECU (Engine Control Unit) controlled alternators to increase fuel efficiency and reduce emissions. Smart alternators provide variable output voltage and shut down when not needed. The Smart BuckBoost has an integrated mechanism that detects whether the engine is running (engine shutdown detection), so the charger is only activated when the alternator is supplying power. This ensures that the charger only draws power when the alternator supplies power.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSeparation of the Starter Battery and the Service Battery\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost separates the starter battery from the service battery.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eComprehensive Electronic Protection\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charger is protected against overtemperature (bottom plate \u0026gt;90 °C) by reducing the output power when the maximum product temperature is reached.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eProtected against overload\u003c\/li\u003e\n\u003cli\u003eProtected against short circuit\u003c\/li\u003e\n\u003cli\u003eProtected against excessive temperatures\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eAdaptive charging in four stages\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost is configured by default for a three-stage charging process.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBulk — Absorption — Float — Storage\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eBulk\u003c\/strong\u003e - During this phase, the Smart BuckBoost supplies as much charging current as possible to quickly charge the batteries.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAbsorption \u003c\/strong\u003e- When the battery voltage reaches the absorption voltage setting, the charger switches to constant voltage aka absorption mode. For lead-acid batteries, it is important that the absorption time is kept short during superficial discharges to avoid overcharging the battery. After a deep discharge, the absorption time is automatically increased to ensure that the battery is fully charged again. For lithium batteries, the absorption time is fixed, 2 hours by default. Fixed or adjustable modes can be selected via the battery settings.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFloat - \u003c\/strong\u003eDuring this phase, the battery is charged with a trickle charge voltage to keep it in a fully charged state. When the battery voltage drops far below this level, for example, due to a high load for at least 1 minute, a new charge cycle is activated.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eStorage - \u003c\/strong\u003eThe battery voltage is maintained at the configured storage voltage, which is slightly reduced comp\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eFlexible Charge Algorithm\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost has fully programmable charge algorithms and eight pre-programmed battery settings. Configurable with VictronConnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdaptive Absorption Time\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eIn adaptive absorption time mode, the correct absorption time is calculated automatically. Configurable with VictronConnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRepeated Absorption\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eTo refresh the battery and prevent slow self-discharge while in the storage stage over an extended period, a 1-hour absorption charge will automatically occur every 7 days (or as configured).\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eTemperature-Compensated Charging\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe optimum charge voltage of a lead-acid battery is inversely proportional to temperature. The Smart BuckBoost DC-DC Charger measures the ambient temperature at the start of the charging phase and compensates for the temperature during charging. The temperature is measured again when the battery charger is in low current mode during absorption or storage. Special settings for a cold or warm environment are therefore not required.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAdjustable Charge Current\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe charge current is adjustable with a minimum step size of 0.1A. Configurable with VictronConnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eLow-Temperature Shutdown\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003ePrevents damage to lithium batteries by turning off the charger at low temperatures. Configurable with VictronConnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eInput Voltage Lock-Out\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eShut down the charger when the input voltage falls below the lock-out value and restart when the input voltage rises above the restart value. Configurable with VictronConnect.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eRemote On\/Off\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe inverter can be switched on and off remotely via the remote on\/off connector or the VictronConnect App. Typical applications include a wired switch or a lithium battery with a Battery Management System (BMS) that has an ATC (allowed to charge) output.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eVE.Direct\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eMonitor and control (on\/off) the Smart BuckBoost via a wired connection from a GX device such as the Cerbo GX, Ekrano GX, or use a PC, Apple computer (requires macOS), or Android device in conjunction with VictronConnect via a wired VE.Direct connection.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eConfiguration and Monitoring via VictronConnect App and Bluetooth\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eBuilt-in Bluetooth Smart: the wireless solution to change settings, monitor activities, and update software using Apple and Android smartphones, tablets, or other devices. Various parameters can be adjusted and monitored with the VictronConnect App.\u003c\/p\u003e\u003cp\u003eThis also includes Instant Readout, which displays the most important data of the Smart BuckBoost (and other smart products) on the Device list page without the need to connect to the product. This includes visual notifications of warnings, alarms, and errors that enable diagnostics at a glance. \u003c\/p\u003e\u003cp\u003eVictronConnect is available for Android, iOS, Windows, and macOS. See the VictronConnect manual to get the most out of the VictronConnect app when connected to a Victron smart product.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eWaterproof\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe Smart BuckBoost complies with an ingress protection rating of IP65; this means the product is dust-tight and protected against heavy rain.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSilent\u003c\/strong\u003e\u003c\/p\u003e\u003cp\u003eThe heat is dissipated through natural convection, eliminating the need for a noisy cooling fan. \u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eSpecifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eInput Voltage Range: 9-17V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Adjust Range: 10-17V\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Tolerance: +\/- 0.25% (max)\u003c\/li\u003e\n\u003cli\u003eOutput Voltage Noise: 10mV rms\u003c\/li\u003e\n\u003cli\u003eInput and Output Current Setting Range: 1 - 50A\u003c\/li\u003e\n\u003cli\u003eMaximum Constant Short-Circuit Current: 50A\u003c\/li\u003e\n\u003cli\u003eContinuous Output Power up to 40 °C: 700W\u003c\/li\u003e\n\u003cli\u003eMaximum Efficiency: 98.5%\u003c\/li\u003e\n\u003cli\u003eNo-Load Current Consumption: \u0026lt; 100mA\u003c\/li\u003e\n\u003cli\u003eStandby Current Consumption: \u0026lt; 1.5mA\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eCommunication Ports Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eBluetooth Smart: Yes\u003c\/li\u003e\n\u003cli\u003eVE.Direct: Yes\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eOther Specifications:\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eOperating Temperature Range: -20 to +60 °C (derating 1.5% per °C above 40 °C)\u003c\/li\u003e\n\u003cli\u003eProtection Category: IP65\u003c\/li\u003e\n\u003cli\u003eDC Connection: Screw terminals\u003c\/li\u003e\n\u003cli\u003eMaximum Cable Cross Section: 25mm² AWG4\u003c\/li\u003e\n\u003cli\u003eWeight: 0.330kg (0.73 lb)\u003c\/li\u003e\n\u003cli\u003eDimensions h x w x d: 137.3 x 123.1 x 40mm (5.4 x 4.85 x 1.6 inch)\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eStandards\u003c\/strong\u003e\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eSafety: IEC 62477-1\u003c\/li\u003e\n\u003cli\u003eEmission: IEC 61000-6-3, EN 55014-1\u003c\/li\u003e\n\u003cli\u003eImmunity: IEC 61000-6-2, IEC 61000-6-1, EN 55014-2\u003c\/li\u003e\n\u003cli\u003eAutomotive Directive: ECE R10-5\u003c\/li\u003e\n\u003c\/ul\u003e\u003cstrong\u003ePlease contact your dealer for any returns, repairs or support issues related to this product.\u003c\/strong\u003e \u003c!--- cis2:m2lnl51t ---\u003e","brand":"Victron Energy","offers":[{"title":"Default Title","offer_id":48754421006627,"sku":"ORI121217040","price":328.1,"currency_code":"USD","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0680\/7751\/9139\/files\/102193XL.jpg?v=1719526171","url":"https:\/\/www.rveparts.com\/products\/victron-ori121217040-orion-xs-smart-12-12-50a-700w-dc-dc-charger","provider":"RVe Parts","version":"1.0","type":"link"}