Marine Hardware

25M VCAN BUS Cable Hub to ThrusterFeatures: 25M  VCAN BUS Cable  Hub to Thruster

1M VCAN BUS Cable Hub to ThrusterFeatures: 1M  VCAN BUS Cable  Hub to Thruster

15M VCAN BUS Cable Hub to ThrusterFeatures: 15M  VCAN BUS Cable  Hub to Thruster

Bow Thruster BTQ 185-55 55KGF - 12V - D185 - 3.0kWBetter Performances, Lower AbsorptionThe 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two...

Bow Thruster BTQ 110-25 25KGF - 12V - D110 - 1.3kWBetter Performances, Lower Absorption The 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The...

TCD2022 Thruster Push Button ControlThe traditional TCD/WCD/TSC controls have been renewed. The updated design matches the style of the QNC Quick Nautical Control commands, which feature a glossy black tempered glass panel.The TCD/WCD/TSC controls differ from the QNC range in the choice of materials,...

D185 Fiberglass TunnelQuick fiberglass tunnel for the installation of bow thrusters. This tunnel is 1 meter in length with a diameter of 185mm.Specifications: Diameter: 185mm Length: 1000mm Thickness: 5.5mm

D125 Fiberglass TunnelQuick fiberglass tunnel for the installation of bow thrusters. This tunnel is 1 meter in length with a diameter of 125mm.Specifications: Diameter: 125mm Length: 1000mm Thickness: 5mm

Door HingeSize:1-1/2" x 3"Fastener: #8(6)Material: 316 Stainless Steel

Bow Thruster BTQ 140-30 30KGF - 12V - D140 - 1.5kWBetter Performances, Lower AbsorptionThe 4-blade Propellers guarantee maximum thrust performance and reduction in current absorption. They are made of composite materials, resistant in every condition. The counter-rotating system offers better thrust performances. The two...

Thruster Cable - 6MThe Quick TCDEX is a control extension cable used on the Quick BTQ bow thruster series to connect the bow or stern thrusters system to the TCD remote panel control system.

Steering Trim Control UnitTrim Switches on the Steering Wheel Improve Safety and Performance. This steering trim control unit is molded of black plastic with raised white letters to not only enhance boat appearance but also provide the ultimate in control of any high performance boat....

Hot Foot™ Throttle Replacement Spring for All ModelsFeatures: Replacement spring for all HOT FOOT™ Throttle models Stainless steel WARNING: This product can expose you to chemicals which are known to the State of California to cause cancer, birth defects or other reproductive harm. For...

CAN Terminating Resistor V2The VETUS CAN Terminating Resistor V2 provides durable marine-grade construction and design, for use in terminating one end of your CAN Bus Network.

Adapter Plate to Replace BPS/BPJ Panels with BPSE/BPJE PanelsAdapter plate for use when replacing old BPS/BPJ panels with updated BPSE/BPJE type panels. The updated panels are 85mm x 85mm, whereas the old style panels measured 98mm x 98mm.

Stainless Steel Eye Mount Flagpole Pennant Clips - Set of 4

Stainless Steel Collar for SD20, SD25, SD30, SD31, SD40, SD50 & SD60 Yanmar SaildrivesTecnoseal Yanmar Stainless Steel Adaptor Plates for Sail Drive Series 20-60. Bolt centres M8.

Stainless 1" Hinged Jaw Slide with BoltThese Slide Fittings are used as part of a Bimini top system to install a new Bimini top, add additional support arms to an existing one, or customize a cock pit or sun deck awning. Jaw Slides attach...

Nylon Adjustable Flagpole Clamps - 1/2" - PairThe flag is attached to the flagpole using sliding, black nylon pennant mounts. Both pennant mounts are adjustable in either direction on the flagpole allowing flexibility in mounting various sizes of flags.

Stainless Steel & Nylon Hinge Adjustable AngleThese Top Mount Hinge Fittings are designed to mount horizontally and attach an eye end in Bimini top applications. Concave Hinges are designed to rail mount on 1” tubing. Angled Hinges are used for mounting items on slanted...