Switches & Panels

Remote for Freedom HF Series Inverter/ChargersReplacement panel for Freedom HF Series inverter/chargers.*Does not include connection cable.Compatible With:Freedom HF Series inverter/chargersFeatures: View key system information Configure and monitor important parameters and settings Conveniently view fault and error codes Technical Specifications: Input Voltage: 12V AC Output:...

Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped...

The days of struggling with marine battery connections are OVER. Along with the full line of HYDRA battery accessories, the HYDRA Battery Cable Extender Kit empowers boaters to go beyond the two posts on a battery so they can easily and efficiently manage their...

These battery trays are designed to have the absolute smallest dimensions possible for mounting batteries in tight spaces. These trays eliminate 1.5" - 2" of space when mounting trays side by side. This space saving was accomplished by eliminating the external mounting tabs and...

Flush mount allows it to be put on the base of a table leg. Chrome plated finish. Includes mounting holes for easy installation. Base only, table sold separately.

12 Volt DC; 20 Amp; Rocker Switch; Rectangular; Red Illuminated; Black; Single Pole Double Throw (SPDT); For Marine Applications

SPDT Rocker Switch - 12V/24V - ON/OFF/ONSingle pole, double throw switch turns one of two circuits on.Features: Nominal voltage is 12V DC Rated for 25A at 12V DC Three 1/4" blade terminals Snap-in mounting to fit panel hole 1.45" x .83" into panels .093"...

VANL ANL Fuse Holder - 1/0 to 4 AWGIt can be tough to find a good place for your system's fuse holder in a crowded engine compartment.  T-SPEC helps you out with their extremely compact Series rotating ANL fuse holder for 1/0-gauge wire that...

Heavy-duty single pole thermal type breakers are ideal for auxiliary and accessory circuits, trucks, buses, RVs and marine applications, battery chargers and DC audio systems. Series 184 and 185 are sealed for engine compartment and bilge area applications. Stud insulators are provided on covered...

The Sierra MP39120 Ignition Switch features maximum corrosion protection that eliminates oxidation. Features an inner seal between the cylinder lock and the contact plate. Composed of non-conductive housing that eliminates potential shorts and switches for magneto and conventional ignitions.

The Sierra MP40990 Lanyard is interchangeable with the following: Cole-Hersee M-598, Sea-Dog 420488-1, 420489-1. Each Sierra product meets or exceeds the original equipment part it replaces. Colored bright red for optimal visibility within marine environments.

T-H Marine's hydra cover provides protection for Hydra Battery Terminal Multiplier. Prevents batteries from arching. PVC material is made to resist wet/harsh environments. Hydra Battery Terminal NOT INCLUDED.

Light Tip Toggle Switches feature a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32"...

Trac T10160 12V Digital Circuit Breaker is rated for 10-25 Amps and is built to be used in marine environments. Refer to manufacturer recommendations and installation guidelines to ensure a proper fit. User selectable circuit break-point is illuminated with high-brightness LED.

This universal momentary Splash Guard Push Button On-Off Switch is wired with two screw terminals and is designed to be panel mounted in a 5/8" diameter hole. PVC coating protects terminals and switch from water. Not designed for immersion. Can be used with Sea-Dog...

The AGC Round Fuse Holder is panel mounted to provide over-current protection in electrical circuits. Constructed of molded Bakelite with stamped brass contacts and a screw-on cap. For use with standard AGC 1/4 x 1-1/4 glass style fuses. Maximum 15A @ 12VDC. Spade terminal.

The Sierra RK40100 Rocker Switch is interchangeable with the following: Sea-Dog 420251-1. Each Sierra product meets or exceeds the original equipment part it replaces. Rated for 20 amp @ 12V.

The Sierra Rotary Switch offers a unique ergonomic design, styling and performance. The durable cam design makes for a long life and the thermoplastic housing is UV stabilized. Replaces the toggle or rocker switches with minimal panel alterations. 1/2 inch hole size.

Drop in replacement for 185-Series circuit breakers. Visible reset lever shows open condition. Ignition protected - safe for installation aboard gasoline powered boats.

Ignition switch with 4 position conventional. Composed with maximum corrosion protection to help eliminate oxidation. Inner seal of switch between cylinder lock and contact plate. Non-conductive housing eliminates potential shorts.