Switches & Panels

Aluminum Vertical Rocker Switch Panel features six 15A 12VDC illuminated SPST On/Off rocker switches and six 10A 12VDC fuse holders. Individual circuit 10A max. 37A total. 12VDC. Includes a sheet of 20 preprinted decals to customize to your specific applications. Constructed of stamped anodized...

This Instrument Hole Adapter allows you to replace an unused 4" gauge with two new 1-1/8" style gauges. Installs by placing the face plate in front of the dashboard then inserting the socket/meter in the hole with the washer behind. The assembly is held...

Battery disconnect and selector switches either switch a single battery to a single load group or isolates and/or combines two battery banks. Can be surface or rear panel mounted. Ignition protected. Safe for installation on gasoline powered boats. Constructed of injection molded nylon with...

Nickel plated brass with chrome plated face nut. Single pole, single throw (off-on). Rated for 6 Amps at 12, 24, and 32 Volts. Max Panel Thickness: 5/16" / Neck Diameter: 7/16" (Note: This switch is not ignition protected.)

T-H Marine's Hydra Battery Terminal Multipliers help easily manage individual connections at the battery. The multiplier features a lead-free, marine-grade zinc construction. Color-coded insulated wing nuts. Kit contains one red Hydra terminal cover to protect positive connections and six stainless steel threaded nuts for...

Three-Position Ignition Switch for off, ignition, and start functions. 13/16" diameter shaft is available in short shaft (maximum panel thickness: 5/8) or long shaft (maximum panel thickness: 1-1/8) versions. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. solenoid 30 amp @ 12VDC. Constructed...

The Wave Rocker Switch Fuse Panel features five ignition protected, illuminating SPST On/Off rocker switches and five fuse holders for use with standard AGC 1/4 x 1-1/4 standard glass fuses (two 3A, two 5A, one 8A, and one 10A). Individual circuit 10A max. 30A...

The Wave Rocker Switch Breaker Panel features five ignition protected, illuminating SPST On/Off rocker switches and five thermal resettable breakers (two 3A, two 5A, one 8A, and one 10A). Individual circuit 10A max. 30A total. Includes a sheet of 20 preprinted decals to customize...

Light Tip Toggle Switches feature a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32"...

The combination multiple gang AGC Fuse Blocks feature a separate grounding terminal bar for circuit distribution to route and connect power or ground circuits. Useful for consolidating multiple wires or feeding multiple circuits. Constructed of molded Bakelite with brass fuse clips and screws. Accepts...

Combination Chart Light and Cigarette Lighter, dual function with the flick of a switch. 304 stainless steel mounting plate installs with two #8 RH fasteners (not included). Chrome steel sockets should only be used on fresh water boats. Sockets will only accept the Lighter/Chart...

Three-Position Magneto-Style Ignition Switch for off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Six screw or five screw plus one boss terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC....

Battery Doctor's Amorphous 20 Watt Solar Charger Kit includes: (1) 20 Watt Solar Panel (Part #23145) and (1) 10 Amp Solar Controller (Part #23122). Amorphous panels and kits work in all daylight conditions helping you to harness the Sun's Energy! Water resistant, shock and...

AGC Watertight Inline Fuse Holders feature a snap tight connection for use in wet or semi-wet locations. Includes standard 1/4" x 1-1/4" 10A, 15A, 20A, 30A, or 50A glass fuse. Constructed of injection molded PVC. Wire gauge from 8-16 AWG.

Chrome plated bat handle with heavy duty toggle switch. Features two 6 inch wire leads. Rated for 6 amps @ 125 VAC. Composed of quality marine-grade parts and materials for optimal performance and reliability.

This Dual USB Rocker Switch Style Voltmeter charges two devices simultaneously while also displaying the batteries output. Fits into any 13/16 x 1-7/16 rocker switch hole. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads,...

Three-Position Ignition Switch for off, ignition, and start functions. 13/16" diameter shaft is available in short shaft (maximum panel thickness: 5/8) or long shaft (maximum panel thickness: 1-1/8) versions. Three screw terminal electrical connection. Ignition: 15A @ 12VDC. solenoid 30 amp @ 12VDC. Constructed...

The Dual Outlet Power Socket Receptacle allows two separate 12V devices to be operated at the same time using a power socket or cigarette lighter. Features 14 lead wire. Constructed of injection molded nylon and stamped brass.

Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped...

Thermal AC/DC Circuit Breakers are designed to protect an electrical circuit from damage caused by excess current. Vibration and shock resistant these push-to-reset circuit breakers are an economical alternative to magnetic breakers. Unlike sacrificial fuses they have the advantage of being resettable after tripping....