Switches & Panels

Light Tip Toggle Switches feature a locking ring and lever seal to resist water penetration. Toggle bat features a lighted tip which is white in the OFF position and red in the ON position. Fits panels up to 1/4" thick and requires a 15/32"...

This universal Momentary Push Button On-Off Switch is wired with two screw terminals and is designed to be panel mounted in a 5/8" diameter hole. Switch options include: No cap, a standard black waterproof cap, or a bright red waterproof cap to make it...

The Sierra MP39530 Push-Pull Switch - Off-On SPST is interchangeable with the following: Cole-Hersee M628-BP, Seadog 420390-1. Each Sierra product meets or exceeds the original equipment part it replaces. Rating 15 amps @ 12 VDC.

T-H Marine's hydra cover provides protection for Hydra Battery Terminal Multiplier. Prevents batteries from arching. PVC material is made to resist wet/harsh environments. Hydra Battery Terminal NOT INCLUDED.

These battery trays are designed to have the absolute smallest dimensions possible for mounting batteries in tight spaces. These trays eliminate 1.5" - 2" of space when mounting trays side by side. This space saving was accomplished by eliminating the external mounting tabs and...

This momentary Push Button On/Off switch features 2 boss copper alloy screw terminal contacts. Compact behind-dash panel dimensions allow for mounting in confined spaces. Overall length: 2-7/8. Mounting stem: 1-7/16L x 5/8"-32 thread. Maximum panel thickness: 1-1/8". 30A @ 12VDC. Constructed of a corrosion...

This injection molded nylon power socket panel accommodates both USB connectors as well as standard power sockets. The dual USB power socket charges two devices simultaneously. Input 12V24VDC. Single output DC 5V/2.1A. Total output is 4.2A with the load being split between the two...

This marine emergency cut-off Universal Kill Switch with Floating Lanyard attaches to your life vest while operating a boat or personal watercraft. Designed to instantly cut battery power when detached. Dual circuitry allows kill switch to be wired for either ignition kill or magneto...

The multiple gang AGC Fuse Block includes a built-in buss bar to conveniently connect electrical wires. Used to provide over-current protection in electrical circuits. Accepts standard 1/4" x 1-1/4" AGC fuses. Fuses not included. 20A @ 12VDC. Constructed of molded Bakelite with brass fuse...

This Horn Button is a panel mounted, push button, momentary On-Off switch for operating fog horns, sirens etc. Mounts in 1/2" diameter hole and is wired with 1/4" QD terminals. This horn switch comes with either a standard black button or bright red button...

Sierra's FS35870 Fuse Holder is designed for ATO/ATC style fuses up to 30 Amps. It features 5"-12 gauge wire leads and a weatherproof sealed case. It is interchangeable with the following: Attwood 14346-6, Kohler 54 755 13-S, Valmar 31552. Each Sierra product meets or...

The Vertical 4-Gang Rocker Switch Panel features four 15A 12VDC illuminated SPST On/Off rocker switches and four fuse holders for use with standard AGC 1/4 x 1-1/4 glass style fuses. Individual circuit 10A max. 37A total. Constructed of fire resistant injection molded nylon these...

Inline Resettable Circuit Breakers with manual reset button are for use with higher amperage accessories. These breakers are ignition protected and can be installed aboard gasoline powered boats. May be used on 12V or 24V systems. Injection molded nylon and polycarbonate construction with stamped...

Three-Position Magneto-Style Ignition Switch for off, ignition, start, and choke functions. 13/16" diameter short shaft for a maximum panel thickness: 5/8. Six screw or five screw plus one boss terminal electrical connection. Ignition: 15A @ 12VDC. Solenoid: 30A @ 12VDC. Choke: 7A @ 12VDC....

Rocker switch from Sierra is composed of quality parts and materials for optimal performance and reliability. Designed to fit .55 in. x 1.1.25 in. cut out. Terminal type for switch is blades. For On-Off SPST.

Water resistant Toggle Switches feature a locking ring with lever seal and a protruding cap nut. Easy to install for a variety of applications. Constructed of stamped brass, injection molded nylon, and polycarbonate. 15A @ 12VDC.

This momentary Horn Button is used for operating fog horns, sirens etc. Activates signaling devise in emergency situations or for communication with locks and bridges. Surface mounts with two #10 RH fasteners (not included). Constructed of chrome plated brass. Designed from quick and simple...

This SPST On/Off Toggle Switch wires easily with two screw terminals. Constructed of stamped brass for durability and corrosion resistance. Maximum panel thickness: 3/8". 15A @ 12VDC. Waterproof Cap (420479) sold separately.

Composed of non-corrosive plastic construction and protects against dust and prolonged spray to IP66 and IP68 standards. Meets UL 1500, ISO8846 ignition protection requirements. Features removable actuators and brass blade terminals with silver contacts.

Double USB Power Plug charges two devices simultaneously while the LCD screen displays charging status in both amps and voltage. Features a low voltage audible alarm. The total output 4.8A load is split 2.4A per side as needed. Enough power to charge phones, pads,...