uflex

UC215-I Cylinder 215CC 9" Stroke Aluminum Uses KITOB SVS HosesBalanced: the number of turns lock-to-lock is equal port to starboard or vice-versa.Specifications: Volume: 215cc - 13.12 cubic inches Torque: 111 kgm (9652 lbs.in) Output force: 673 kg (1483 lbs) Internal diameter: 40 mm (1.57")...

UC94 Mounting HardwareMounting hardware for UC94 Cylinder

UC94 Spacer KitSpacer kit for UC94 Cylinder

UC94 Tiller Bolt KitTiller bolt kit for UC94 Cylinder

UC95OBF-1 Hydraulic Cylinder 175HP or LessIntended for single engine applications of 175 HP and under, the UC95 OBF-1 cylinder is compatible with competing helms, hoses, and oil, and is built to last with heavy-duty stainless steel cylinder rods, seals, and link assemblies.Features: Balanced the...

MasterDrive UCMD – User InterfaceFeatures: Safety switch ON/OFF (SMART BUTTON) Three different power levels with light indicator (PATENTED) Motor temperature visual indicator Twin-engine key selection included Lighted panel for stand-by position Plug-in wiring harness Suitable for a second station installation 7m (23') panel extension...

Masterdrive™ 32CC Front Mount HelmFeatures: Available in two different displacement sizes: 32 cc (1.95 cu.in) and 40 cc (2.44 cu.in) Front Mount and Tilt Mount versions The dual station installation version is also available (please refer to the MD2 Kit) Built-in relief valve 3/4”...

Union 3/8" CompressionTypical Application:Used to connect 2 standard 3/8" compression hoses Specifications: 3/8 COMP FITTING Both Sides =  9/16 - 24 UNEF 2A

Union T-Fitting f/3/8" Tube Compression Hose FittingsUnion T-Fitting for 3/8" TubeTypical Applications: T-Fitting for 3 standard 3/8" compression thread hose fittings Specifications:3/8 COMP FITTING ALL Sides = 9/16 - 24 UNEF 2A

UP28F - Front Mount Helm PumpFeatures: Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Cast iron rotor for greater...

UP28R Rear Mount Helm 1.7 cu. 3/4" Tapered Stainless Steel ShaftFeatures: Available in four different displacement sizes Compact design Ball bearing piston race Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection 3/4” tapered stainless steel shaft Easily accessible lock...

Uflex UP28T-X52 Tilt Mount Helm Pump is 1.7 cubic inches and features 5 pistons with a 48?? tilt range. It has a relief valve setting of 70 Bar, 1000 PSI. The maximum wheel diameter of UP28T-X52 is 16 inches (406 millimeters) and weighs 11...

UP33FM Helm Pump 2.0 Cubic InchesFeatures: Compact design Built-in lock valve for positive rudder lock Integral relief valve for over-pressure protection Compatible with Teleflex SeaStar cylinders, hoses and oil 3/4" tapered stainless steel shaft Easily accessible lock valve and shaft seal for replacement Convenient...

UP39 Rear Mount HelmSpecifications: Mounting: Rear Mount Displacement/Revolution: 39 cc - 2.4 cubic inches No. of Pistons: 7 Relief Valve Setting: 70 Bar - 1000 PSI Maximum Wheel Diameter: 710mm - 28" Weight: 5 kg - 11 lbs.

UPMD MasterDrive Power Unit1 UPMD Power Unit, 15' (4.5M) wiring harness includedFeatures: 12VDC Motor 45° swiveling fittings for easy installation Semitransparent 0,5 liter (0.11gal) tank gives immediate oil level vision Vented filler plug Suitable for applications with autopilot Bulkhead or floor mount Black galvanized...

Standard 3/4" taper and hub included. 13.8" wheel is made from quality materials. Please confirm wheel will fit your boat before ordering.

Standard 3/4" taper and hub included. 13.8" wheel is made from quality materials. Please confirm wheel will fit your boat before ordering.

Standard 3/4" taper and hub included. 13.8" wheel is made from quality materials. Please confirm wheel will fit your boat before ordering.

Standard 3/4" taper and hub included. 13.8" wheel is made from quality materials. Please confirm wheel will fit your boat before ordering.

Made with thermoplastic antishock material. Features standard 3/4" taper. Please confirm wheel will fit your boat before ordering.