Uflex

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome Nut - BlackFeatures: Speed knob and nut included All black, including the speed knob & chrome nut Steering wheels are CE marked in conformity with the EN 28848 EN 29775 and ABYC...

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob & Chrome NutFeatures: Speed knob and nut included Polished stainless steel Steering wheels are CE marked in conformity with the EN 28848 EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5" 3...

V46 - 13.5" Stainless Steel Steering Wheel with Speed Knob - BlackFeatures: Speed knob included All black, including the speed knob Steering wheels are CE marked in conformity with the EN 28848 – EN 29775 and ABYC P22 safety standards Specifications: Diameter: (inch) 13.5"...

1/4 NPT to 3/8 T-FittingTypical Application:Fitting used in the back of the previous version of the UP series helms before the boss fittingSpecifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

12x12 Polished Stainless Steel Trim Tab KitImprove fuel economy and passenger comfort with Uflex electromechanical trim tabs. Featuring electropolished stainless steel planes and low consumption, high speed, composite actuators, these tabs are built to last in the most demanding sea conditions.Uflex trim tabs have...

This wheel nut is intended for use with Uflex steering systems. Please confirm part will fit before ordering. Made with quality materials.

For complete control of engine tilt, trim tabs, jackplates, PowerPole and other onboard systems, the innovative Paddle Trim system is the answer. Adaptable to existing front-mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments...

For complete control of engine tilt, trim tabs, jackplates, PowerPole and other onboard systems, the innovative Paddle Trim system is the answer. Adaptable to existing front-mount hydraulic and tilt helms, the Paddle Trim is ergonomically designed to allow the driver to make precise adjustments...

Power A PA2-MA Electro-Mechanical Actuator Shirt/ThroThe electromechanical actuators can control any mechanical interface (throttle shift or trolling) through MACHZero and C8 mechanical cables.Specifications: IP protection: IP66 Length: 320mm (12.6") This product may not be returned to the original point of purchase. Please contact the...

45° Adjustable Fitting for Back of UP Series HelmsTypical Application:Fitting for the back of the UP series helmsSpecifications: ORB, Size #6 to 3/8 COMP FITTING Helm Side = 9/16 - 18 UNF 2A Hose Side = 9/16 - 24 UNEF 2A

All Uflex steering wheels meet the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 - EN 29775 and ABYC P22 safety standards. Please confirm part will fit before ordering.

All Uflex steering wheels meet the EEC directive 94/25 requirements about pleasure boats. All steering wheels are CE marked in conformity with the EN 28848 - EN 29775 and ABYC P22 safety standards. Made from quality materials.

Tavolara - 13.8" Black Polyurethane Steering Wheel with Silver Spokes & X62 HubThis Uflex Tavolara steering wheel is a 3-spoke boat steering wheel with aluminum anodized silver spokes and a polyurethane leather-look grip.Features: Standard 3/4“ taper Meet with the EN28848, EN29775 & ABYC P22...

Features blue grip with silver spokes, and a standard 3/4" taper. Hub with button included. Please ensure wheel will fit before ordering. Made with quality materials.

90° 3/8 NI Plate Comp FittingTypical Application:90° fitting from bulkhead fitting to 3/8" compression hose Specifications: 3/8 COMP FITTING Fitting Side =  9/16 - 24 UNEF 2B Hose Side =  9/16 - 24 UNEF 2A

90° Helm Fitting for UP SeriesTypical Application:Fitting for port/starboard line in the UP series helms prior to the boss fittingsSpecifications: 1/4 NPT to 3/8 COMP FITTING Helm Side = 1/4 NPT Hose Side = 9/16 - 24 UNEF 2A

Link arm assembly, stainless steel for Mercury engines up to 50 HP. Warning: A73 and A74 tiller arms are recommended for mechanical steering systems only. Made with quality materials.

Link arm assembly, stainless steel for some Johnson, Evinrude and BRP engines. Warning: A73 and A74 tiller arms are recommended for mechanical steering systems only. Made with quality materials.

This Link Arm Clevis Kit is intended for use with Uflex steering systems. Please confirm part will fit before ordering. Made with quality materials.

Twin Cylinder Adjustable Tiebar 26'-32' - Mercury/YamahaFor twin OB engines/Dual cylinder, Allows to tilt the engines independently, it’s also available in semi-assembled bars and brackets, stainless steel components.Features: 2 different lengths available: From 26” (660,4 mm) to 32” (818,8 mm) twin engine centers and...