Flow-Rite

A pump-out feature provides a convenient means of filling a tournament livewell weigh-in bag and also enables a livewell to be pumped out while the boat is still in the water or when moored at a dock overnight. The Flow-Rite Pump-Out Aerator is the...

Ideal for situations where a short hose is required, using one straight socket and one elbow socket. The straight Qwik-Lok socket features a latching arm for holding the socket securely in place and a locking ring that locks the latching arms and can be...

ProTimer automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer to the desired interval and concentrate on fishing. ProTimer conserves battery life, is easy to install and easy to operate. Can be connected to an existing switch in...

ProTimer automatically turns your pump on and off for desired circulation and aeration. Set the ProTimer to the desired interval and concentrate on fishing. ProTimer conserves battery life, is easy to install and easy to operate. Can be connected to an existing switch in...

Control cables are available in lengths from 6' to 17' in one foot increments. Each cable includes the brass attachment nut and quick disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use.

Control cables are available in lengths from 6' to 17' in one foot increments. Each cable includes the brass attachment nut and quick disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use.

Control cables are available in lengths from 6' to 17' in one foot increments. Each cable includes the brass attachment nut and quick disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use.

Control cables are available in lengths from 6' to 17' in one foot increments. Each cable includes the brass attachment nut and quick disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use.

Control cables are available in lengths from 6' to 17' in one foot increments. Each cable includes the brass attachment nut and quick disconnect locking retainer for attachment to the actuator. Features a stainless steel control wire for fresh or salt water use.

System 1 Open/Closed Livewell Actuator for use with V1 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

System 2 Empty/Automatic Livewell Actuator for use with V2 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

System 4 Fill/Empty/Recirculate Livewell Actuator for use with V4 series valves. Requires two MD-093 screws for installation, not included. Control your livewell with just the flip of a switch!

The Power-Jet aerator is designed to be mounted well below the surface of the livewell for direct introduction of fresh oxygenated water. It can be used with systems 2, 3, or 4, or a livewell mounted aerator pump only. (It is not for use...

The PowerStream Aerator features a venturi air intake at the top of the discharge head to maximize the oxygen entering the livewell water. The longer mixing tube directs this mixture directly to the depths of the livewell and is then discharged horizontally well below...

With today?ÇÖs high performance hull designs, jack plates and larger outboards, putting a drain plug in or taking one out can be a very unpleasant task. The Flow-Rite Remote Drain Plug makes that job as simple as turning a switch. No more lying on...

With today?ÇÖs high performance hull designs, jack plates and larger outboards, putting a drain plug in or taking one out can be a very unpleasant task. The Flow-Rite Remote Drain Plug makes that job as simple as turning a switch. No more lying on...

The V1 valve provides remote drain control and eliminates the need for drain plugs and standpipes. A short 60 ° cable throw provides more support, strength, and smoothness than long 90 ° throws used with conventional valves. Features dual seals for positive shut-off in...

The V2 is our reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. By mounting the pump to the valve body, the...

The V2 is our reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. By mounting the pump to the valve body, the...

Like the V2, the V3 is a reversible check valve that allows a single pump to not only perform the basic livewell functions necessary to keep your catch alive, but does it in a passive or automatic manner. It also has a third closed...